HW components

SYNSTORES - HACCP REPORTING SYSTEM

UNIQUE PROPERTIES OF HW COMPONENTS

The sensors do not need any power source; they have integrated batteries with a lifetime of at least 10 years.
The sensors are calibrated and they are certified for contact with foodstuffs.
The sensors are water- and dust-proof. The sensors‘ surfaces are easy to clean.
The sensors can be located inside any device – in cooling or freezing display cases and counters, any plug-in freezing systems, drink coolers, freezing and cooling boxes and warehouses.

The sensors are in round lens shape – they are not an obstacle to any goods manipulation processes.
Tested by the Czech Office for Standards, Metrology and Testing according to EN 12830:2018.
Easy installation and replacement, no cables or wires.
Without any subsequent calibrations.

HW COMPONENTS - TECHNICAL PARAMETERS

Gateway GB41

LTE gateway for wireless temperature
sensors and open-door sensors
External 5V USB adapter
Operating temperature: -10˚C to 50˚C
Storage temperature: -40˚C to 55˚C
GSM LTE
Integrated SIM
Integrated GSM antenna
2 GB internal memory, at least 100,000 samples
Backup battery for at least 24 hours of operation
Dimensions 210 x 210 x 80 mm
IP20 protection

HACCP temperature sensor TS1

Fully wireless temperature sensor
Temperature measurement accuracy of 0.3°C
within the temperature range between -30°C and +50°C for the period of at least 10 years
Applicable temperature range of the temperature sensor between -30°C and +50°C Measuring interval of 2 minutes
Applied frequency – 868.3 MHz
Battery minimum lifetime of 10 years, integrated battery
Open-space range of 800 m
Dimensions 80 x 20 mm, round
No calibrations needed
IP65 protection

Temperature and humidity sensor - Lobby sensor LS1

Fully wireless temperature and humidity sensor in the store
Temperature measurement accuracy of 0.5°C
Applicable temperature range of the temperature sensor between -5°C and +45°C
Humidity measurement 0-100%
Humidity measurement accurancy +- 3% RH within range 0-80% RH
Measuring interval of 2 minutes
Applied frequency – 868.3 MHz
Open-space range of 400 m
Dimensions 80 x 80 x 12 mm
Replaceable battery CR2032, lifetime up to 10 years
IP20 protection

Repeater GE41

A signal amplifier for remote sensors
Applied frequency – 868.3 MHz
Dimensions 210 x 210 x 80 mm
Battery operation (in case of a power outage)
for at least 24 hours
External 5V USB adapter
IP20 protection

Door magnet DS1M

Dimensions 38 x 14 x 25 mm
IP65 protection

Door sensor DS1

Fully wireless door contact
Applicable temperature range between -30°C and +50°C
Applied frequency – 868.3 MHz
Battery minimum lifetime of 10 years, integrated battery
Open-space range of 800 m
Dimensions 88 x 19 x 35 mm
IP65 protection

NEW TYPES OF SENSORS

Base unit for 2 external sensors EB2

Fully wireless unit
Operating temperature: -30 °C to +50 °C
Measuring interval of 2 minutes
Applied frequency – 868.3 MHz
Battery minimum lifetime of 10 years, integrated battery, replaceable
Open-space range of 800 m
Dimensions 80 x 80x 25 mm
Possible to connect up to 2 sensors
Mounting by magnets
No calibrations needed
IP65 protection

Penetration sensor for core temperature (1.5 m cable) NS4

Temperature measurement accuracy of 0.4°C
within the temperature range between -30 °C
and +80 °C for the period of at least 10 years
No calibrations needed
Cable length 1.5 m
IP65 protection

External sensor 50 mm tip (1.5 m cable) ES5

Temperature measurement accuracy of 0.4°C
within the temperature range between -30 °C
and +80 °C for the period of at least 10 years
No calibrations needed
Cable length 1.5 m
IP65 protection

Product temperature simulation sensor (1.5 m cable) PS7

Temperature measurement accuracy of 0.4°C
within the temperature range between -30 °C
and +50 °C for the period of at least 10 years
No calibrations needed
Cable length 1.5 m
IP65 protection

CO2 sensor SCO2

NDIR CO2 sensor technology
Dual-channel detection for superior stability
Measurement range: 400 ppm – 10.000 ppm
Accuracy: ±(30 ppm + 3%)
Accuracy drift over lifetime: ± 50 ppm
Humidity measurement: ± 5 %RH (25°C, 0 – 95 %RH) - indicative measurement
Supply 12V DC (Adapter 230V AC/12V DC included)
Measuring interval: 5 minutes
Consumption 0.1W
Dimensions 80 x 80 x 12 mm
IP20 protection

Service-TAG ST1

Identifies automatically the Service Technician when working in the store on a service call and reports this to store manager and records it in the SYNSTORES application.

Dimensions: diameter 50mm
Used transmition frequencies: 868MHz
Range: 800m (open space)
Power supply: Lithium battery, lifespan of 10 years, integrated
Identification: unique TAG number
Protection rating: IP65
Broadcast reception: only via SYNSTORES GATEWAY
Material: ABS

ENERGY MONITORING UNIT

Energy Monitoring Unit 400V EMU3

Power supply: 3x 400V AC
Calibration: Calibration from production
Measurements: Electricity consumption
Range of measurement: max. 3 x 16A (max. 3 x 32A)
Measuring accuracy: 2%
Measuring interval: 5 minutes
Used trasmission frequency: 868,3 MHz
Reach: 500 m
Operating conditions: -30 °C / +60 °C
Dimensions: 230 x 220 x 95 mm
Insulation class: IP40
Sensor type: Wattmetr
Material: ABS
Assembly/installation: By connecting to electric outlets, freely or via a mounting tape

Energy Monitoring Unit 230V EMU1 / EMU1S

Power supply: 230V AC
Calibration: Calibration from production
Measurements: Electricity consumption in kWh / 230S actuating
Range of measurement: 0–16A
Measuring accuracy: 2%
Measuring interval: 5 minutes
Used trasmission frequency: 868,3 MHz
Reach: 500 m
Operating conditions: -30 °C / +60 °C, c 0–95 %
Dimensions: 140 x 80 x 40 mm
Insulation class: IP40
Sensor type: Wattmetr
Material: ABS
Assembly/installation: By connecting to electric outlets, freely or via a mounting tape